PROFESSIONAL INDUSTRIAL AUTOMATION PROGRAMMING
Course Fee: 20,000 Taka (Installment Payment) Duration: 4 Months
Call for More Information: 01898-480403 (Course Coordinator)
Level-01: Industrial Controlling Device.
e.🔷Application of Industrial controlling Device.
🔷 How to test & measure Industrial controlling Devices.
🔷 Working principle &
practical connection with Industrial controlling device.
(Industrial Controlling Device: - Push & Selector Switch Limit Switch, Different
type of Relay, Magnetic Contactor, Timer, Counter, Temperature Controller,
Floatless Relay, Over Load Relay, Phase Failure Relay, RTD, Thermocouple,
Photo Electric Sensor, Proximity or Metal Sensor, Solenoid Valve)
Level-02: Basic Manual Industrial Controlling.
🔷 Play With NO & NC Contact.
🔷 Latching Making & Example.
🔷 Single Load Control from multiple Locations.
🔷 Direct ON Line (DOL) Starter.
🔷 Overload Protection System in DOL Starter.
🔷 Phase Failure Protection System Connection with Motor Controlling Circuit.
🔷 Interlocking
system design for 2 loads.
🔷 How to make an Interlock Protection System Design for Multiple Load.
🔷 3 Phase Load (Motor) Control based on Time.
Level-03: Advanced Manual Industrial Controlling.
🔷Sequential 3-Phase Load (Motor) Control by Relay, Timer, and Magnetic Contactor.
🔷 Sequential Motor Control Circuit Design with Practical Connection.
🔷 Auto Star Delta Starter Design and practical connection.
🔷 Automatic Reverse Forward Circuit Design and Practical Connection.
🔷 Automatic Reverse Forward by Limit Switch or Sensor.
🔷 Automatic Transfer Switch Circuit Design and Practical Connection.
Level-04: Siemens LOGO PLC Programming & Implementation.
🔷 Overview SIEMENS LOGO PLC.
🔷 Hardware Connection of Siemens LOGO PLC.
🔷 Software Overview of Siemens Logo PLC. 🔷 PLC to Computer Communication.
🔷 PLC to Smartphone Communication.
🔷 PLC To Web Server Communication.
🔷 Different Types of GATE Operation.
🔷 Time-Based Load Control Programming.
🔷 Sequential Motor Control PLC Programming.
🔷 Star Delta Starter Programming.
🔷 Automatic Reverse Forward Programming.
🔷 Parts Assembler machine Programming.
🔷 Automatic Car Parking System Programming
Level-05: SIEMENS S7-200 PLC Programming & Implementation.
🔷 Introduction to Siemens Trainer.
🔷 Introduction to Siemens PLC.
🔷 Introduction to Siemens PLC Software - MicroWIN.
🔷 Series & Parallel Circuit Exercise.
🔷 Latching and Interlocking Exercise.
🔷 Use of Positive Transition and Negative Transition.
🔷 Timers & Counter functions with different types of Programs.
🔷 Timer with Comparison operators.
🔷 Timer with Move operators.
🔷 Counter with Comparison and Move Operations.
🔷 Counter
with Math Operations.
🔷 Use of Data Registers
🔷 Block Move Function.
🔷 Up Down Counter Function.
🔷 Immediate Commands.
🔷 Interrupts Function.
🔷 Jump Commands.
🔷 Retentive Timers.
🔷 Sequential Control Relay (SCR).
🔷 SET RESET Instructions.
🔷 SET RESET Bistable Instructions. 🔷 Subroutines
& Timer Off Delay.
🔷 Understanding Analogue Input and Output. 🔷 Siemens PLC Exercise for practice with solutions.
Level-06:
DELTA PLC Programming & Implementation.
🔷Introduction to Delta PLC Trainer. 🔷 Sinking Sourcing Understanding for PLC Wiring.
🔷 Fundamental Commands of PLC: LD. LDI & OUT (Session 1 to 4). 🔷 Fundamental Commands of PLC: SET & RESET Commands.
🔷 Fundamental Commands of PLC: Timers & Counters. 🔷 Types of Timers in Delta PLC.
🔷 Fundamental Commands of PLC: Timers & Counters (Session 1 to 3). 🔷 Data Registers- Session 1 to 3 (How to Store Information in PLC.
🔷 How to use the Internal Memory of PLC? 🔷 Latched Registers in DVP 14SS.
🔷 Special Bits in Delta DVP 14SS. 🔷 Introduction to ITS- Interactive Training System PLC PE.
🔷 Understanding Rising and Falling Edge - critical command in many applications.
🔷 Understanding Increment and Decrement Commands - Helps in counting.
🔷 Arithmetic Commands - ADD, SUB, MUL, DIV - Making
calculations easy.
🔷 Block Move and Fill Move - How to move data in bulk quickly. 🔷 Call Jump with application - How to skip part of ladder Logic.
🔷 Interrupts - Learning External interrupts. 🔷 Master Control MC and MCR - Setting up a control Zone.
🔷 Pulse Width Modulation (PWM) - High-speed pulse output. 🔷 Retentive Timers - How to retain values in PLC Timer.
🔷 Sequencer - How to read and write information in Input/Output Data
registers.
🔷 Compare and Zone Compare - CMP & ZCP. 🔷 PLC Advanced Instruction Presentation.
🔷 Understanding Analog to Digital Cards in PLC. 🔷 Understanding Digital to Analog Cards in PLC.
🔷 Digital to Analog Application Example. 🔷 Gain and Offset Settings in Analog to Digital Cards.
🔷 Gain & offset Settings in Digital to Analog Cards. 🔷 PLC Analog Cards Exercises with Solutions.
🔷 PLC Application Exercises for Practice. 🔷 PLC to VFD MODBUS Communication Example.
Level-07: MITSUBISHI PLC Programming & Implementation.
🔷 Introduction of Mitsubishi PLC. 🔷 Software Installation and Overview.
🔷 Programming with Fundamental Instruction. 🔷 Timer and Counter Function Using.
🔷 Use of Memory and Data Registers. 🔷 Move & Block Move with Memory or Data Register.
🔷 Memory with Comparison Operators Example. 🔷 Jump Commands Operation.
🔷 Subroutines Command with program example. 🔷 Analogue Input Read Write Command.
🔷 Analogue Output Controlling System.
Level-08: Industrial Project Design Programming and Implementation.
🔷 Automatic Reverse Forward System Programming 🔷 Hydraulic System Operation by PLC.
by comparing functions.
🔷 Packaging Machine Programming. 🔷 Automatic Transfer Switch (ATS) System Programming
🔷 Tank Filling and Discharge Control Programming. 🔷 Conveyor Belt Control Programming.
🔷 PLC Box Sorting - Left & Right. 🔷 PLC Project Alternate Box Sorting.
🔷 Separation Station System Programming. 🔷 Coffee Maker Machine Programming.
🔷 Treatment Plant Automation System Programming 🔷 Pneumatic Machine Automation System Design.
Level-09: Variable Frequency Drive (VFD) / Inverter.
🔷 Working Principle of VFD. 🔷 Hardware Connection of VFD.
🔷 Parameter Setting Of VFD. 🔷 Selecting the source of Frequency in VFD.
🔷 Selecting the source of Operation in VFD. 🔷 Acceleration & Deceleration Time Setting in VFD.
🔷 Jog Mode Operation in VFD. 🔷 How to select the Multiple Sources of Frequency in VFD.
🔷 How to Disable the Reverse Operation of Motor? 🔷 Speed Control of Motor by Inverter and PLC.
Level-10: Servo Drive Understanding the Wiring
& Parameter.
🔷 Servo Drive and Motor Programming and Implementation. 🔷 Servo ON/OFF control using PLC.
🔷 Servo ON/OFF and Direction control using PLC. 🔷 Servo Understanding servo feedback bit to make a loop of logic.
🔷 Servo Indexing of Servo at 45 degrees with time delay 🔷 Servo Indexing of Servo at 45 degrees using Sensor
🔷 Servo Indexing of Servo at 90 degrees FWD and REVERSE 🔷 Servo Indexing at different Positions and directions in a loop
Level-11: Stepper Drive Understanding the Wiring & Parameter.
🔷 Stepper ON/OFF control using PLC. 🔷 Stepper ON/OFF and Direction control using PLC.
🔷 Stepper Understanding servo feedback bit to make a loop of logic🔷 Stepper Indexing of Servo at 45 degrees with time delay.
🔷 Stepper Indexing of Servo at 45 degrees using Sensor. 🔷 Stepper Indexing of Servo at 90 degrees FWD and REVERSE.
🔷 Stepper Indexing at different Positions and directions in the loop
Level-13: HMI Programming and Communication with PLC.
🔷 Overview of HMI. 🔷 Hardware Connection of HMI.
🔷 Software Overview of HMI. 🔷 HMI Programming.
🔷 HMI to Computer Communication. 🔷 Communication With PLC, INVERTER & HMI to Control 3 phase Motor.
Variable Frequency Drive
11 (VFD) / Inverter.
